30W SFF Compact Driver

Description

The SFF Compact Drivers are designed to provide reliable and efficient power solutions for a wide range of lighting applications. With a UL Class P rating, these drivers ensure high safety and performance standards, making them suitable for commercial and residential environments.

Featuring a compact form factor, the SFF Compact Drivers easily fit into tight spaces, providing flexibility in design and installation. They comply with DLC and Title 24 requirements, guaranteeing energy efficiency and regulatory compliance.

The drivers offer a dimming range of 1-100% through amplitude dimming, delivering smooth, flicker-free performance that enhances the overall lighting experience. Casambi Ready, these drivers integrate seamlessly into smart lighting systems, allowing for advanced automation and control capabilities.

Additionally, the SFF Compact Drivers support NFC programming, enabling easy configuration and customization via compatible devices.

Operating Current				300-600 mA
Input Voltage				120-277 Vac
Output Voltage				28-52 Vdc
Efficiency at Full Load				88% (Typical)
Current Accuracy				± 5%
Power Factor				0.9 (Output Power > 25W)
Lifetime				at Tc 75 ºC: 50,000 hrs at performance range (0.2% / 1,000 h failure rate

Mains voltage supply
Rated input voltage range				120-277 Vac; performance range
Max. input voltage range				108-305 Vac; operational safety range
Rated frequency range				50/60 Hz
Performance / Operational safety				47…63 Hz
Max. input current				0.5 A @ 120 Vac

Protection against voltage peaks
Withstand voltage				I/p-O/p: 1.6 kVac, < 5 mA 60 sec, I/p-earth: 1.6 kVac, < 5 mA 60 sec, O/p-earth: 0.5 kVac, < 5 mA 60 sec
Mains surge immunity				L-N 1 kV, L/N-earth 2kV per IEC 61000-4-5, 2.5 kV ring wave

Total harmonic distortion (THD)
At rated input voltage range @ full load				≤ 20%

Output data
Output current tolerance				± 5% at rated input voltage performance range
No load output voltage				≤ 60 Vdc
Ripple output current				5% (ripple = peak/average total 100 Hz)

Protection functions output side
Overvoltage protectione				The output voltage is less than or equal to 60 V
Overpower protection				The output power is less than or equal to 55 W
Short circuit protection				Hiccup mode. Protection device will trigger when short circuit and will auto recover after the fault mode is removed.

Dimming operation and interface
Dimming mode				Bluetooth
Dimming method				Amplitude dimming
Dimming current range				1%…100%

Wiring
Input wire				18 AWG wire exposed 150 ± 10mm
Output wire				20 AWG wire exposed 150 ± 10mm
Wire stripping length				8-9 mm

Degree of protection
Protection rating				IP20

Operating data
Output current range				NFC control adjusts the current: 600…1200 mA
Default output current				600 mA
Output voltage range				28…52 Vdc
Noise level				< 20 dB, at full load @ 100 cm distance

The luminaire manufacturer is responsible for measuring and verifying the EMl compliance of the complete luminaire, as
the level of radio interference will vary depending on the luminaire construction. Especially primary and secondary cable
lengths and their routing may have a significant effect on radio interference.
The recommended NFC communication distance:5…20 mm.

Operating Temperature				-20 ºC to 50 ºC / -4 to 122ºF
Storage Temperature				-25 ºC to 85 ºC / -13 to 185ºF
Working Humidity				10%…90%
Store Humidity				5% to 95%
Maximum Tc Temperature				85 ºC / 185ºF

Housing Dimensions		Packaging Details
Length (L)	103.5 mm	Packing Units	64
Width (W)	27.3 mm	Carton Size	298 x 274 x 154mm 11.73” x 10.78” x 6.069″
Height (H)	22.65 mm	Weight	0.106kg
Weight	7.78kg

back-view

All connections must be as short as possible to ensure good EMl performance.
The luminaire wire should keep a certain distance from the LED power supply and other wires (5…10 cm is preferred).
No secondary switches are allowed.
Incorrect wiring can damage the LED.
The wire must be well protected against short circuits.

back-view